Hello,
I`ve recently bought this setup and also did a Home Assistant integration for them with CCU3, RaspberryMatic. Not using the AP anymore.
Setup it (floor heating) :
- 2 X control HMIP FAL230 -C10 : Using only 6 chanels per each floow.
- HMIP-MIOB
- 5 thermostats (3 HMIPSTH, 1 STHD, 1 BWTH)
Main problem is : How it actually works ?
1. Looks like its working continuously, in 5 days the head demand was around 10-12h per day. Its huge given the fact that outside were 5-8 degrees.
2. Load collector or load balancing ? Which one is ok to use? Both cases the boiler works like crazy, huge consumption.
3. Is there a way to sync both FAL230 (from each floor) when asking for heating to go simultaneously eveywhere ? It happened that 1h asked for heating the one from the 1st floow, (boiler worked like crazy), then when it stopped the ground floor asked for heating and one more hour continuously.
Also those cycles, it works something like 5 mins OFF - 1-2 mins ON .. continuously, all day and all night looong!!
What I did wrong, what I am missing ? I`ve spend a lot of money to have it and its consumption its triple than before..and extremely annoying with these cycles.
HomematicIP - MIOB + 2x FAL230 -C10 + CCU3 = Not working as it should. Need assistance, please.
Support for our english speaking visitors
Moderator: Co-Administratoren
Zurück zu „HomeMatic - english“
Gehe zu
- Allgemein
- ↳ Informationen zum HomeMatic-Forum
- ↳ Neubau - Renovierung - Planung
- ↳ Projektvorstellungen
- ↳ Usertreffen und Stammtische
- ↳ Vergangene Aktivitäten
- ↳ OffTopic
- ↳ Tiergarten
- HomeMatic
- ↳ HomeMatic allgemein
- ↳ HomeMatic Tipps & Tricks - keine Fragen!
- ↳ HomeMatic Zentrale (CCU / CCU2 / CCU3 / Charly)
- ↳ HmIP-HCU - Home Control Unit
- ↳ HomeMatic OCCU
- ↳ Allgemeines zur OCCU
- ↳ OCCU Entwicklung
- ↳ debmatic
- ↳ piVCCU
- ↳ RaspberryMatic
- ↳ x86-CCU
- ↳ YAHM
- ↳ HomeMatic Aktoren und Sensoren (klassisch)
- ↳ HomeMatic IP Aktoren und Sensoren
- ↳ HomeMatic IP wired Aktoren und Sensoren
- ↳ HomeMatic IP mit Access Point
- ↳ HomeMatic IP mit CCU
- ↳ HomeMatic - bekannte Bugs
- ↳ HomeMatic Addons
- ↳ CCU-Historian
- ↳ CCU.IO
- ↳ CCU-Jack
- ↳ CloudMatic
- ↳ CUxD
- ↳ Hue-Addon
- ↳ RedMatic
- ↳ WebMatic
- ↳ Sonstige Addons
- ↳ HomeMatic Entwicklung
- ↳ Softwareentwicklung für die HomeMatic CCU
- ↳ Softwareentwicklung von externen Applikationen
- ↳ Hardwareentwicklung und Selbstbau von Aktoren und Sensoren
- ↳ 3D-Druck
- ↳ HomeMatic Apps und Desktop-Anwendungen
- ↳ TinyMatic
- ↳ Externe Steuerungen und Visualisierungen
- ↳ Home Assistant
- ↳ homeputer CL
- ↳ homeputer CL - Bugs & Updatewünsche
- ↳ IP-Symcon
- ↳ mediola
- ↳ openHAB
- ↳ Sonstige Steuerungen und Visualisierungen
- ↳ HomeMatic - english
- FHZ-, FS20-, HMS100-, FHT-, KeyMatic- & sonstige Hardware
- ↳ ELV FHZ Funk-Hauszentralen
- ↳ ELV FS20 Sender, Empfänger und Aktoren
- ↳ ELV HMS-Alarm Sensoren und Aktoren
- ↳ ELV FHT-Komponenten
- ↳ ELV Wettersensoren / Wetterstationen
- ↳ ELV KeyMatic Funk-Codeschloss & Türschlossantrieb
- ↳ Sonstige Hardware (Vellemann USB-Board, IRTrans, ALLNET)
- FHZ Software / Programmierung
- ↳ homeputer Studio / Standard: allgemeine Fragen
- ↳ homeputer Studio / Standard: Programmierbeispiele
- ↳ homeputer Studio / Standard: Bugs & Updatewünsche
- ↳ FHZ unter Linux / MacOSX
- Markt
- ↳ Private Kleinanzeigen