Hallo,
folgendes Problem:
Wenn ich in OH2 von einem Schaltaktor zu schnell den Status wechsle, fängt dieser an sehr schnell
den Status selbständig zu wechseln. Dies kann ich dann nur durch stoppen des OH2 Dienstes beenden.
Betroffen sind alle HM Schaltaktoren.
Dies tritt aber nicht auf, wenn ich den OH2 Dienst beende und den Status in der WebUI schnell hintereinander wechsle.
Im OH-LOG sehe ich fogendes wenn ich "normal" schalte:
2018-11-11 16:25:09.962 [vent.ItemStateChangedEvent] - Licht_Kueche changed from ON to OFF
2018-11-11 16:25:10.048 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command OFF
2018-11-11 16:25:10.052 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command OFF
2018-11-11 16:25:12.110 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command ON
2018-11-11 16:25:12.131 [vent.ItemStateChangedEvent] - Licht_Kueche changed from OFF to ON
2018-11-11 16:25:12.170 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command ON
2018-11-11 16:25:12.185 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command ON
Und folgendes wenn der Fehler auftritt:
2018-11-11 16:32:07.651 [vent.ItemStateChangedEvent] - Licht_Kueche changed from ON to OFF
2018-11-11 16:32:07.685 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command OFF
2018-11-11 16:32:07.693 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command OFF
2018-11-11 16:32:08.194 [vent.ItemStateChangedEvent] - Licht_Kueche changed from OFF to ON
2018-11-11 16:32:08.228 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command ON
2018-11-11 16:32:08.243 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command ON
2018-11-11 16:32:08.728 [vent.ItemStateChangedEvent] - Licht_Kueche changed from ON to OFF
2018-11-11 16:32:08.759 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command OFF
2018-11-11 16:32:08.766 [ome.event.ItemCommandEvent] - Item 'Licht_Kueche' received command OFF
Verwendung findet
################# openhab2 ######################################## 7.05.170509
###############################################################################
## Ip =
## Release = Raspbian GNU/Linux 8 (jessie)
## Kernel = Linux 4.9.35-v7+
## Platform = Raspberry Pi 3 Model B Rev 1.2
## Uptime = 10 day(s). 17:17:33
## CPU Usage = 25.95 % avg over 4 cpu(s) (4 core(s) x 1 socket(s))
## CPU Load = 1m: 2.82, 5m: 1.90, 15m: 0.96
## Memory = Free: 0.14GB (15%), Used: 0.80GB (85%), Total: 0.94GB
## Swap = Free: 0.01GB (20%), Used: 0.07GB (80%), Total: 0.09GB
## Root = Free: 106.45GB (96%), Used: 4.43GB (4%), Total: 116.87GB
## Updates = 0 apt-get updates available.
## Sessions = 1 sessions
## Processes = 143 running processes of 32768 maximum processes
## Nginx = Version: 1.6.2
###############################################################################
Vielen Dank für Hinweise
Mark
OH2 - HM Schaltaktoren wechseln Status selbständig sehr schnell
openHAB - open Home Automation Bus
Moderator: Co-Administratoren
Gehe zu
- Allgemein
- ↳ Informationen zum HomeMatic-Forum
- ↳ Neubau - Renovierung - Planung
- ↳ Projektvorstellungen
- ↳ Usertreffen und Stammtische
- ↳ Vergangene Aktivitäten
- ↳ OffTopic
- ↳ Tiergarten
- HomeMatic
- ↳ HomeMatic allgemein
- ↳ HomeMatic Tipps & Tricks - keine Fragen!
- ↳ HomeMatic Zentrale (CCU / CCU2 / CCU3 / Charly)
- ↳ HmIP-HCU - Home Control Unit
- ↳ HomeMatic OCCU
- ↳ Allgemeines zur OCCU
- ↳ OCCU Entwicklung
- ↳ debmatic
- ↳ piVCCU
- ↳ RaspberryMatic
- ↳ x86-CCU
- ↳ YAHM
- ↳ HomeMatic Aktoren und Sensoren (klassisch)
- ↳ HomeMatic IP Aktoren und Sensoren
- ↳ HomeMatic IP wired Aktoren und Sensoren
- ↳ HomeMatic IP mit Access Point
- ↳ HomeMatic IP mit CCU
- ↳ HomeMatic - bekannte Bugs
- ↳ HomeMatic Addons
- ↳ CCU-Historian
- ↳ CCU.IO
- ↳ CCU-Jack
- ↳ CloudMatic
- ↳ CUxD
- ↳ Hue-Addon
- ↳ RedMatic
- ↳ WebMatic
- ↳ Sonstige Addons
- ↳ HomeMatic Entwicklung
- ↳ Softwareentwicklung für die HomeMatic CCU
- ↳ Softwareentwicklung von externen Applikationen
- ↳ Hardwareentwicklung und Selbstbau von Aktoren und Sensoren
- ↳ 3D-Druck
- ↳ HomeMatic Apps und Desktop-Anwendungen
- ↳ TinyMatic
- ↳ Externe Steuerungen und Visualisierungen
- ↳ Home Assistant
- ↳ homeputer CL
- ↳ homeputer CL - Bugs & Updatewünsche
- ↳ IP-Symcon
- ↳ mediola
- ↳ openHAB
- ↳ Sonstige Steuerungen und Visualisierungen
- ↳ HomeMatic - english
- FHZ-, FS20-, HMS100-, FHT-, KeyMatic- & sonstige Hardware
- ↳ ELV FHZ Funk-Hauszentralen
- ↳ ELV FS20 Sender, Empfänger und Aktoren
- ↳ ELV HMS-Alarm Sensoren und Aktoren
- ↳ ELV FHT-Komponenten
- ↳ ELV Wettersensoren / Wetterstationen
- ↳ ELV KeyMatic Funk-Codeschloss & Türschlossantrieb
- ↳ Sonstige Hardware (Vellemann USB-Board, IRTrans, ALLNET)
- FHZ Software / Programmierung
- ↳ homeputer Studio / Standard: allgemeine Fragen
- ↳ homeputer Studio / Standard: Programmierbeispiele
- ↳ homeputer Studio / Standard: Bugs & Updatewünsche
- ↳ FHZ unter Linux / MacOSX
- Markt
- ↳ Private Kleinanzeigen