Kein Funkmodul erkannt

Virtualisierte CCU für Raspberry Pi und Clones

Moderator: Co-Administratoren

Antworten
michi12
Beiträge: 12
Registriert: 15.01.2018, 20:40

Kein Funkmodul erkannt

Beitrag von michi12 » 15.01.2018, 20:48

Hallo zusammen

Nachdem ich das ioBroker + piVCCU Image installiert habe und das Update starten wollte,
bekomme ich die folgenden Fehlermeldungen (s. Anhang).

Zuvor hatte ich das raspimatic problemlos in Betrieb.
Auf dem HM-Funkmodul läuft laut raspimatic die Firmware 2.85.

Könnt ihr mir bitte sagen, wie ich das Funkmodul mit piVCCU betreiben kann?
Hier noch der Output der info:

Code: Alles auswählen

piVCCU version: 2.31.23-20
Kernel modules: Available
Raw UART dev:   Available
Board serial:   MEQ0835905
State:          RUNNING
PID:            616
IP:             192.168.178.52
CPU use:        35.18 seconds
BlkIO use:      42.00 MiB
Link:           vethpivccu
 TX bytes:      6.31 KiB
 RX bytes:      609.43 KiB
 Total bytes:   615.74 KiB
Was noch hinzukommt- wenn ich ein Backup von raspimatic einspiele, dann habe ich unter Status->Geräte keine Geräte drin.
Wenn ich aber unter Einstellungen-> Geräte gehen sind sie komischerweise alle da.
Ich habe bis auf CuxD alle Addons deinstalliert.
Des Weiteren kommt dann auch das BidCos-RF nicht reagiert.

Danke für eure Hilfe!
Dateianhänge
Unbenannt2.PNG
Fehler 2
Unbenannt2.PNG (11.35 KiB) 2130 mal betrachtet
Unbenannt.PNG
Fehler 1
Unbenannt.PNG (14.32 KiB) 2130 mal betrachtet
Nach oben
Benutzeravatar
deimos
Beiträge: 5410
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 962 Mal
Kontaktdaten:
Kontaktdaten von deimos

Re: Kein Funkmodul erkannt

Beitrag von deimos » 15.01.2018, 21:05

Hi,


Die Ausgabe von pivccu-info sieht danach aus, dass sie nach dem Update gemacht wurde (wg. der Versionsnummer) und da wird das Funkmodul komplett korrekt erkannt, daher gehe ich davon aus, dass auch alles in der CCU läuft. du kannst das recht einfach verifizieren, indem du dich in der CCU WebUi anmeldest und in den Anmeldedialog gehst. Wenn da HmRF und HmIP angezeigt wird, ist alles fein.

Die Meldung beim Update kommt vermutlich vom mittlerweile doch recht großen Versionssprung zwischen dem Image und der neuen Version und da hat sich einiges im Kernelmodul und im Device Tree getan, was einen Reboot braucht, bevor das Funkmodul erkannt werden kann. Schau ich mir die Tage aber nochmal an.

Viele Grüße
Alex
Nach oben
michi12
Beiträge: 12
Registriert: 15.01.2018, 20:40

Re: Kein Funkmodul erkannt

Beitrag von michi12 » 15.01.2018, 21:09

Vielen Dank Alex für die schnelle Antwort.
Ich hab meinen Beitrag noch editiert, weiß nicht ob du es gesehen hast.
Es geht um das Backup des raspimatic.
Gruß
michi
Nach oben
Benutzeravatar
deimos
Beiträge: 5410
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 962 Mal
Kontaktdaten:
Kontaktdaten von deimos

Re: Kein Funkmodul erkannt

Beitrag von deimos » 15.01.2018, 21:16

Hi,

hast du CUxD in der CCU2 Version drüberinstalliert?

Wenn nein, dann das als erstes mal machen.

Ansonsten bitte einmal der Raspberry komplett neu starten (zur Sicherheit) und nach ca. 2-3 Minuten folgende Befehle ausführen und hier posten:

Code: Alles auswählen

sudo pivccu-info
sudo pivccu-attach cat /var/log/messages
sudo pivccu-attach cat /var/log/hmserver.log
Viele Grüße
Alex
Nach oben
Benutzeravatar
deimos
Beiträge: 5410
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 962 Mal
Kontaktdaten:
Kontaktdaten von deimos

Re: Kein Funkmodul erkannt

Beitrag von deimos » 15.01.2018, 21:18

Hi,

und ganz vergessen: Zur Sicherheit bitte auch den Browsercache löschen.

Viele Grüße
Alex
Nach oben
michi12
Beiträge: 12
Registriert: 15.01.2018, 20:40

Re: Kein Funkmodul erkannt

Beitrag von michi12 » 15.01.2018, 21:24

Hallo Alex

Die normale CUxD habe ich drüberinstalliert und danach dann den Restart gemacht.
Ich habe nen Browsercache-Reset gemacht und die IP geändert, damit ich da kein Problem erhalte.

Hier der Output der Info:

Code: Alles auswählen

piVCCU version: 2.31.23-20
Kernel modules: Available
Raw UART dev:   Available
Board serial:   MEQ0835905
State:          RUNNING
PID:            599
IP:             192.168.178.110
CPU use:        43.75 seconds
BlkIO use:      44.53 MiB
Link:           vethpivccu
 TX bytes:      999.35 KiB
 RX bytes:      285.81 KiB
 Total bytes:   1.26 MiB
Hier der Log1:

Code: Alles auswählen

><
Jan 15 21:19:14 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:19:14 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:14 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:15 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:15 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:15 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:15 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:15 homematic-ccu2 user.debug multimac: C<: #24 TRX GetDutyCycle
Jan 15 21:19:15 homematic-ccu2 user.debug multimac: C< @135234: bin:FD 00 03 01 18 03 C8 1D
Jan 15 21:19:15 homematic-ccu2 user.debug multimac: C> @135336: #24 TRX Response Ack 00
Jan 15 21:19:15 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:19:16 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:16 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:16 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:16 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:19:16 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:17 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:17 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:17 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:17 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:17 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:17 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:19:17 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:17 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #2HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:20 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:21 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:21 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:21 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:21 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:21 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:21 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:21 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:21 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:19:21 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:23 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:23 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:23 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:23 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:23 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:23 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:23 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:23 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:25 homematic-ccu2 user.debug multimac: C<: #25 TRX GetDutyCycle
Jan 15 21:19:25 homematic-ccu2 user.debug multimac: C< @145235: bin:FD 00 03 01 19 03 4E 1E
Jan 15 21:19:25 homematic-ccu2 user.debug multimac: C> @145337: #25 TRX Response Ack 00
Jan 15 21:19:25 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:19:26 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:29 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:29 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:29 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:29 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:29 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:29 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:29 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:29 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:30 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:30 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:30 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:30 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:31 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:31 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:31 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:31 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:19:31 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:32 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:32 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:32 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:32 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:32 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:19:32 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:32 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:32 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:34 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:34 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:34 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:34 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:35 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:35 homematic-ccu2 user.debug multimac: C<: #26 TRX GetDutyCycle
Jan 15 21:19:35 homematic-ccu2 user.debug multimac: C< @155235: bin:FD 00 03 01 1A 03 44 1E
Jan 15 21:19:35 homematic-ccu2 user.debug multimac: C> @155337: #26 TRX Response Ack 00
Jan 15 21:19:35 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:19:36 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:36 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:36 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:36 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:19:36 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:38 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:38 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:38 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:38 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:38 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:38 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:38 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:38 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:40 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:40 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:40 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:40 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:19:41 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:44 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:44 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:44 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:44 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:44 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:44 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:44 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:44 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:45 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:45 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:45 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:45 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:45 homematic-ccu2 user.debug multimac: C<: #27 TRX GetDutyCycle
Jan 15 21:19:45 homematic-ccu2 user.debug multimac: C< @165235: bin:FD 00 03 01 1B 03 C2 1D
Jan 15 21:19:45 homematic-ccu2 user.debug multimac: C> @165337: #27 TRX Response Ack 00
Jan 15 21:19:45 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:19:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:46 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:19:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:47 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:47 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:47 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:47 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:47 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:47 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:19:47 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:47 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #2HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:50 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:51 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:51 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:51 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:51 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:19:51 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:52 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:52 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:52 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:52 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:53 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:53 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:53 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:53 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:53 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:53 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:53 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:53 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:55 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:55 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:55 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:55 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:55 homematic-ccu2 user.debug multimac: C<: #28 TRX GetDutyCycle
Jan 15 21:19:55 homematic-ccu2 user.debug multimac: C< @175235: bin:FD 00 03 01 1C 03 50 1E
Jan 15 21:19:55 homematic-ccu2 user.debug multimac: C> @175337: #28 TRX Response Ack 00
Jan 15 21:19:55 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:19:56 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:19:59 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:59 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:59 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:59 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:19:59 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:19:59 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:19:59 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:19:59 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="CUX9001001:1"."STATE"=true [iseXmlRpc.cpp:321]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 4469 [iseDOMchn.h:288]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 4467 [iseDOMdev.h:225]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: XmlRpcMethodEvent::execute: UpdateValue succeeded; val = 1 [iseXmlRpc.cpp:364]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="CUX9001001:1"."SWITCH_1H"=0.000000 [iseXmlRpc.cpp:321]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 4469 [iseDOMchn.h:288]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 4467 [iseDOMdev.h:225]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: XmlRpcMethodEvent::execute: UpdateValue succeeded; val = 0.000000 [iseXmlRpc.cpp:364]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="CUX9001001:1"."TIME_ON_1H"=60.000000 [iseXmlRpc.cpp:321]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 4469 [iseDOMchn.h:288]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 4467 [iseDOMdev.h:225]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: XmlRpcMethodEvent::execute: UpdateValue succeeded; val = 60.000000 [iseXmlRpc.cpp:364]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="CUX9001001:1"."TIME_OFF_1H"=0.000000 [iseXmlRpc.cpp:321]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 4469 [iseDOMchn.h:288]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 4467 [iseDOMdev.h:225]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: XmlRpcMethodEvent::execute: UpdateValue succeeded; val = 0.000000 [iseXmlRpc.cpp:364]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="CUX9001001:1"."TIME_ON"=1841.619999 [iseXmlRpc.cpp:321]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 4469 [iseDOMchn.h:288]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 4467 [iseDOMdev.h:225]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: XmlRpcMethodEvent::execute: UpdateValue succeeded; val = 1841.619999 [iseXmlRpc.cpp:364]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="CUX9001001:1"."TIME_OFF"=200.000000 [iseXmlRpc.cpp:321]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 4469 [iseDOMchn.h:288]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 4467 [iseDOMdev.h:225]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: XmlRpcMethodEvent::execute: UpdateValue succeeded; val = 200.000000 [iseXmlRpc.cpp:364]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="CUX9001001:1"."TIME_ON_SUM"=64033.569946 [iseXmlRpc.cpp:321]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 4469 [iseDOMchn.h:288]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 4467 [iseDOMdev.h:225]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: XmlRpcMethodEvent::execute: UpdateValue succeeded; val = 64033.569946 [iseXmlRpc.cpp:364]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="CUX9001001:1"."SWITCH_SUM"=2947.000000 [iseXmlRpc.cpp:321]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 4469 [iseDOMchn.h:288]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 4467 [iseDOMdev.h:225]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jan 15 21:20:00 homematic-ccu2 local0.debug ReGaHss: Verbose: XmlRpcMethodEvent::execute: UpdateValue succeeded; val = 2947.000000 [iseXmlRpc.cpp:364]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:00 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:01 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:01 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:01 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:01 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:01 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:02 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:02 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:02 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:02 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:02 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:02 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:02 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:02 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:05 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:05 homematic-ccu2 user.debug multimac: C<: #29 TRX GetDutyCycle
Jan 15 21:20:05 homematic-ccu2 user.debug multimac: C< @185236: bin:FD 00 03 01 1D 03 D6 1D
Jan 15 21:20:05 homematic-ccu2 user.debug multimac: C> @185338: #29 TRX Response Ack 00
Jan 15 21:20:05 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:20:06 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:06 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:06 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:06 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:06 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:08 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:08 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:08 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:08 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:08 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:08 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:08 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:08 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:10 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:10 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:10 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:10 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:11 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:14 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:14 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:14 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:14 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:14 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:14 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:14 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:14 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:15 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:15 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:15 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:15 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:15 homematic-ccu2 user.debug multimac: C<: #30 TRX GetDutyCycle
Jan 15 21:20:15 homematic-ccu2 user.debug multimac: C< @195236: bin:FD 00 03 01 1E 03 DC 1D
Jan 15 21:20:15 homematic-ccu2 user.debug multimac: C> @195338: #30 TRX Response Ack 00
Jan 15 21:20:15 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:20:16 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:16 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:16 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:16 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:16 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:17 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:17 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:17 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:17 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:17 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:17 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:17 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:17 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:18 homematic-ccu2 local0.info ReGaHss: Info: SchedulerRT::ExecuteWriteJob: try to call set state - DP id = 950 value = 0 [iseRTScheduler.cpp:629]
Jan 15 21:20:18 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jan 15 21:20:18 homematic-ccu2 local0.info ReGaHss: Info: SchedulerRT::ExecuteWriteJob: set state - DP id = 950 [iseRTScheduler.cpp:634]
Jan 15 21:20:18 homematic-ccu2 local0.debug ReGaHss: Verbose: SchedulerRT::Execute -> ExecuteWriteJob: oid = 950; ticks = 1 [iseRTScheduler.cpp:591]
Jan 15 21:20:18 homematic-ccu2 local0.info ReGaHss: Info: SchedulerRT::ThreadFunction(): wait for event ms= 4294967295 [iseRTScheduler.cpp:481]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #2HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:20 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:21 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:21 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:21 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:21 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:21 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #2HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:23 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:25 homematic-ccu2 user.debug multimac: C<: #31 TRX GetDutyCycle
Jan 15 21:20:25 homematic-ccu2 user.debug multimac: C< @205236: bin:FD 00 03 01 1F 03 5A 1E
Jan 15 21:20:25 homematic-ccu2 user.debug multimac: C> @205338: #31 TRX Response Ack 00
Jan 15 21:20:25 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:26 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:29 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:29 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:29 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:29 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:29 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:29 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:29 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:29 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:30 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:30 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:30 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:30 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:31 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:31 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:31 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:31 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:31 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:32 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:32 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:32 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:32 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:32 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:32 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:32 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:32 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #2HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:35 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:35 homematic-ccu2 user.debug multimac: C<: #32 TRX GetDutyCycle
Jan 15 21:20:35 homematic-ccu2 user.debug multimac: C< @215236: bin:FD 00 03 01 20 03 D8 1E
Jan 15 21:20:35 homematic-ccu2 user.debug multimac: C> @215238: #32 TRX Response Ack 00
Jan 15 21:20:35 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:20:36 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:36 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:36 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:36 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:36 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:36 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:36 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:36 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:36 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:38 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:38 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:38 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:38 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:38 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:38 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:38 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:38 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:40 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:40 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:40 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:40 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:41 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:42 homematic-ccu2 user.debug multimac: C> @222174: #7 LLMAC RX @23970ms -86dBm 3F 86 70 41 7A A0 00 00 00 00 C9 38
Jan 15 21:20:42 homematic-ccu2 user.debug multimac: Bidcos RX: #3F[BC|Ren|WMup] 417AA0->000000 WeatherData: 00 C9 38
Jan 15 21:20:42 homematic-ccu2 user.debug multimac: GetAckActionForIncomingTelegram(): Unknown peer, AckAction_NotForUs
Jan 15 21:20:44 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:44 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:44 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:44 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:44 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:44 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:44 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:44 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:45 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:45 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:45 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:45 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:45 homematic-ccu2 user.debug multimac: C<: #33 TRX GetDutyCycle
Jan 15 21:20:45 homematic-ccu2 user.debug multimac: C< @225237: bin:FD 00 03 01 21 03 5E 1D
Jan 15 21:20:45 homematic-ccu2 user.debug multimac: C> @225239: #33 TRX Response Ack 00
Jan 15 21:20:45 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:20:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:46 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:47 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:47 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:47 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:47 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:47 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:47 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:47 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:47 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #2HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:50 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:51 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:51 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:51 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:51 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:51 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:53 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:53 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:53 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:20:53 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:53 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:53 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:53 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:53 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:54 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:54 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:54 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:54 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:55 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:55 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:55 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:55 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:55 homematic-ccu2 user.debug multimac: C<: #34 TRX GetDutyCycle
Jan 15 21:20:55 homematic-ccu2 user.debug multimac: C< @235237: bin:FD 00 03 01 22 03 54 1D
Jan 15 21:20:55 homematic-ccu2 user.debug multimac: C> @235339: #34 TRX Response Ack 00
Jan 15 21:20:55 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:20:56 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:20:59 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:59 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:59 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:59 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:20:59 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:20:59 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:20:59 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:20:59 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:00 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:00 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:00 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:00 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:01 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:01 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:01 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:01 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:01 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:02 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:02 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:02 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:02 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:02 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:02 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:02 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:02 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #2HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:05 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:05 homematic-ccu2 user.debug multimac: C<: #35 TRX GetDutyCycle
Jan 15 21:21:05 homematic-ccu2 user.debug multimac: C< @245237: bin:FD 00 03 01 23 03 D2 1E
Jan 15 21:21:05 homematic-ccu2 user.debug multimac: C> @245240: #35 TRX Response Ack 00
Jan 15 21:21:05 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:21:06 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:06 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:06 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:06 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:06 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:07 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:07 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:07 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:07 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:08 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:08 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:08 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:08 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:08 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:08 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:08 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:08 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:08 homematic-ccu2 user.debug multimac: C> @247503: #8 LLMAC RX @16629ms -66dBm F1 86 10 4A 6F 4F 00 00 00 0A B0 E6 0C 29 00
Jan 15 21:21:08 homematic-ccu2 user.debug multimac: Bidcos RX: #F1[BC|Ren|WMup] 4A6F4F->000000 Info: 0A B0 E6 0C 29 00
Jan 15 21:21:08 homematic-ccu2 user.debug multimac: GetAckActionForIncomingTelegram(): Unknown peer, AckAction_NotForUs
Jan 15 21:21:10 homematic-ccu2 user.debug multimac: C> @249437: #9 LLMAC RX @18570ms -70dBm 64 84 5E 33 8E B5 00 00 00 80 0C 2B 00 06 74 00 8C 09 0A 01
Jan 15 21:21:10 homematic-ccu2 user.debug multimac: Bidcos RX: #64[BC|Ren] 338EB5->000000 EnergyCyclic: 80 0C 2B 00 06 74 00 8C 09 0A 01
Jan 15 21:21:10 homematic-ccu2 user.debug multimac: GetAckActionForIncomingTelegram(): Unknown peer, AckAction_NotForUs
Jan 15 21:21:10 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:10 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:10 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:10 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:11 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:14 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:14 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:14 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:14 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:14 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:21:14 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:14 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:14 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:15 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:15 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:15 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:15 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:15 homematic-ccu2 user.debug multimac: C> @255215: #10 LLMAC RX @24372ms -61dBm 31 84 5E 33 92 31 00 00 00 87 C3 1F 00 06 7C 00 73 09 0E FF
Jan 15 21:21:15 homematic-ccu2 user.debug multimac: Bidcos RX: #31[BC|Ren] 339231->000000 EnergyCyclic: 87 C3 1F 00 06 7C 00 73 09 0E FF
Jan 15 21:21:15 homematic-ccu2 user.debug multimac: GetAckActionForIncomingTelegram(): Unknown peer, AckAction_NotForUs
Jan 15 21:21:15 homematic-ccu2 user.debug multimac: C<: #36 TRX GetDutyCycle
Jan 15 21:21:15 homematic-ccu2 user.debug multimac: C< @255238: bin:FD 00 03 01 24 03 40 1D
Jan 15 21:21:15 homematic-ccu2 user.debug multimac: C> @255341: #36 TRX Response Ack 00
Jan 15 21:21:15 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:21:16 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:16 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:16 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:16 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:16 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:17 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:17 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:17 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:17 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:17 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:17 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:17 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:17 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #2HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:20 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:21 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:21 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:21 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:21 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:21 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:23 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:23 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:23 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:23 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:23 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:23 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:21:23 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:23 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:25 homematic-ccu2 user.debug multimac: C<: #37 TRX GetDutyCycle
Jan 15 21:21:25 homematic-ccu2 user.debug multimac: C< @265238: bin:FD 00 03 01 25 03 C6 1E
Jan 15 21:21:25 homematic-ccu2 user.debug multimac: C> @265241: #37 TRX Response Ack 00
Jan 15 21:21:25 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:26 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:29 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:29 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:29 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:29 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:29 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:29 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:29 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:29 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:30 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:30 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:30 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:30 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:31 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:31 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:31 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:31 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:31 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:32 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:32 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:32 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:32 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:32 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:32 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:32 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:32 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #2HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:35 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:35 homematic-ccu2 user.debug multimac: C<: #38 TRX GetDutyCycle
Jan 15 21:21:35 homematic-ccu2 user.debug multimac: C< @275238: bin:FD 00 03 01 26 03 CC 1E
Jan 15 21:21:35 homematic-ccu2 user.debug multimac: C> @275341: #38 TRX Response Ack 00
Jan 15 21:21:35 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:21:36 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:36 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:36 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:36 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:36 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:38 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:40 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:40 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:40 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:40 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:41 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:44 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:44 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:44 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:44 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:44 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:21:44 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:44 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:44 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:45 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:45 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:45 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:45 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:45 homematic-ccu2 user.debug multimac: C<: #39 TRX GetDutyCycle
Jan 15 21:21:45 homematic-ccu2 user.debug multimac: C< @285239: bin:FD 00 03 01 27 03 4A 1D
Jan 15 21:21:46 homematic-ccu2 user.debug multimac: C> @285342: #39 TRX Response Ack 00
Jan 15 21:21:46 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:21:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:46 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:47 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:47 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:47 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:47 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:47 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:47 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:47 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:47 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #2HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:50 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:51 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:51 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:51 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:51 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:51 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:53 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:53 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:53 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:53 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:53 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:53 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:21:53 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:53 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:55 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:55 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:55 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:55 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:55 homematic-ccu2 user.debug multimac: C<: #40 TRX GetDutyCycle
Jan 15 21:21:55 homematic-ccu2 user.debug multimac: C< @295239: bin:FD 00 03 01 28 03 68 1D
Jan 15 21:21:55 homematic-ccu2 user.debug multimac: C> @295341: #40 TRX Response Ack 00
Jan 15 21:21:56 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #2 [httpServer.cpp:764]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 115 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 379 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: invalid session - null pointer [iseESPexec.cpp:3483]
Jan 15 21:21:56 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jan 15 21:21:59 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:59 homematic-ccu2 local0.info ReGaHss: Info: recvd 842 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:59 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@MEzrzPuqNh@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:59 homematic-ccu2 local0.info ReGaHss: Info: error page sent by id #1HTTP/1.1 500 Internal Server Error^M Server: ise GmbH HTTP-Server v2.0^M Accept-Ranges: bytes^M Cache-Control: no-store, no-cache^M Content-Type: text/html; charset=iso-8859-1^M ^M <html><head></head><
Jan 15 21:21:59 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jan 15 21:21:59 homematic-ccu2 local0.info ReGaHss: Info: recvd 906 bytes by web server #1 [httpServer.cpp:764]
Jan 15 21:21:59 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@9EMS0miLuc@&action=UpdateUI [iseSession.cpp:185]
Jan 15 21:21:59 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
und der Log 2:

Code: Alles auswählen

Jan 15 21:17:44 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] @GenericFactory
Jan 15 21:17:44 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] creating instance of HMServerConfiguration with no-arg constructor
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [HMIPTRXWriterWorker] (1) *worker
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [KeyServerWorker] (1) *worker
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [KryoPersistenceWorker] (1) *worker
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [TransactionSubsystemHandler] (1) *worker
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [FirmwareLoaderFileSystem] (1) *worker
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerPersistentDataLoader] (1)
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerAdapterInitialization] (1)
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [BackendCommandHandler] (1)
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceInclusionAcceptHandler] (1)
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [IncomingHMIPFrameHandler] (1)
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceBackgroundUpdateSubsystem] (1)
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceInclusionDefaultConfigurationChanger] (1)
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [CyclicSmokeDetectorAwakening] (1)
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerFirmwareUpdateInitialization] (1)
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyNotificationHandler] (1) *worker
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyAPIWorker] (1) *worker
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyBackendNotificationHandler] (3) *worker
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyBlindLevelCorrectionHandler] (1) *worker
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyInitializion] (1)
Jan 15 21:17:52 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: deploying 19 classes to Vert.x
Jan 15 21:17:53 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: 19 VertxDeployers initialized
Jan 15 21:17:53 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of CyclicSmokeDetectorAwakening succeeded (bdd751ba-f486-48a0-8a21-6caa9978fafa)
Jan 15 21:17:53 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of DeviceInclusionDefaultConfigurationChanger succeeded (eefc67e6-7642-4fac-9a90-34a2df4bd522)
Jan 15 21:17:53 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of TransactionSubsystemHandler succeeded (d4993fa4-d212-46be-8771-b563510be2a8)
Jan 15 21:17:53 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of HMIPTRXWriterWorker succeeded (6e55ac0b-8363-4e9d-89f4-40db7863e7df)
Jan 15 21:17:53 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of LegacyBlindLevelCorrectionHandler succeeded (f3840ecf-0f9a-447b-8fd9-388a166032ca)
Jan 15 21:17:53 de.eq3.cbcs.server.core.vertx.KeyServerWorker ERROR [vert.x-worker-thread-3] Missing key server configuration parameter (Network.Key) for  mode: KEYSERVER_LOCAL
Jan 15 21:17:53 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of KeyServerWorker succeeded (d4d46e8a-00af-4f96-a69e-ac139feb96bd)
Jan 15 21:17:54 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of DeviceBackgroundUpdateSubsystem succeeded (d7ebeb40-4134-44f3-bbe9-2adada4d5859)
Jan 15 21:17:55 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of KryoPersistenceWorker succeeded (154dbeb7-ba63-43ff-91b9-3a2666015736)
Jan 15 21:17:55 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of LocalServerPersistentDataLoader succeeded (b5643f49-5bf0-4451-831a-c582a96d7910)
Jan 15 21:17:56 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of IncomingHMIPFrameHandler succeeded (1c747264-c3d7-4091-ae5e-4341550e2479)
Jan 15 21:17:56 de.eq3.cbcs.server.core.otau.util.FirmwareLoaderFileSystem INFO  [vert.x-worker-thread-2] SYSTEM: Firmware update directory is set to /etc/config/firmware
Jan 15 21:17:56 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of DeviceInclusionAcceptHandler succeeded (082b1b28-8a57-4b03-b6e9-2f5ce99f000a)
Jan 15 21:17:56 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of FirmwareLoaderFileSystem succeeded (395603cc-c336-48a5-bba4-2cf428a1a565)
Jan 15 21:17:56 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of LegacyNotificationHandler succeeded (efd1e044-6982-4c5a-9ac1-ca2c956d2380)
Jan 15 21:17:56 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of LegacyBackendNotificationHandler succeeded (e60b30c0-e749-403e-bb1e-5f5b3d0e4fb1)
Jan 15 21:17:56 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of BackendCommandHandler succeeded (f3fedd47-4de7-4e7b-8744-04d59df9ddf6)
Jan 15 21:17:56 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of LegacyAPIWorker succeeded (c67d38b3-318f-4921-9610-3953cf3da66e)
Jan 15 21:17:56 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of LocalServerAdapterInitialization succeeded (8395a016-00ce-4276-b169-b113ef79f36d)
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter state 1: HMIP_TRX_App
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter application is already running
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] No NWK, try to set address ...
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Try to set radio address 12379740...
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Set max send attempts for 3014F711A061A7D3C9962941 to 3
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Try to get application version...
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Application version 2.8.5
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Bootloader version 1.0.3
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] hmos version 1.20.2
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] MCU type: Si1002_8051
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Duty Cycle: 0.0
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] set DutyCycle limit to ffffffc8
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Set Duty Cycle Limit
Jan 15 21:17:56 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Current Security Counter: 32916224
Jan 15 21:17:57 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter has no linkpartner
Jan 15 21:17:57 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Adapter with Access Point id 3014F711A061A7D3C9962941 initialized
Jan 15 21:17:57 de.eq3.cbcs.server.local.base.internal.LocalServerAdapterInitialization INFO  [Thread-6] HMIPTRXInitialResponseListener said that Adapter was initialized
Jan 15 21:17:57 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of LegacyInitializion succeeded (fed089e3-77b1-44ab-b630-5a0f7eb25c5d)
Jan 15 21:17:57 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of LocalServerFirmwareUpdateInitialization succeeded (ec691e86-fcd9-42d8-9aca-eb2b3f97ee26)
Jan 15 21:17:57 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-3] SYSTEM: Checking all devices on all accesspoints for updates
Jan 15 21:17:57 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-3] SYSTEM: There are 0 APs queued with updatable devices
Jan 15 21:17:57 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: initial deployment complete _____________________________________________________
Jan 15 21:17:59 de.eq3.ccu.server.HMServer INFO  [Thread-2] Default MaxEventLoopExecuteTime: 2000000000
Jan 15 21:17:59 de.eq3.ccu.server.HMServer INFO  [Thread-2] Default BlockedThreadCheckInterval: 1000
Jan 15 21:17:59 de.eq3.ccu.server.HMServer INFO  [Thread-2] Default MaxWorkerExecuteTime: 60000000000
Jan 15 21:17:59 de.eq3.ccu.server.HMServer INFO  [Thread-2] Default EventLoopPoolSize: 8
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [BackendWorker] (1) *worker
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [GroupRequestWorker] (1) *worker
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [DiagramRequestWorker] (1) *worker
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [StorageRequestWorker] (1) *worker
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [DeviceFirmwareRequestWorker] (1) *worker
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [EnergyPriceRequestWorker] (1) *worker
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [CouplingRequestWorker] (1) *worker
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: deploying 7 classes to Vert.x
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: 7 VertxDeployers initialized
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of BackendWorker succeeded (25a59a6c-a7bb-4c09-81e7-8184e411aaff)
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of StorageRequestWorker succeeded (f9524e99-bde5-43fb-b472-23ceb351a581)
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of CouplingRequestWorker succeeded (e07b0b2b-9317-4067-9b16-4f129c9efec9)
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of EnergyPriceRequestWorker succeeded (b779828e-af67-4630-8ea7-ce779c25046c)
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of GroupRequestWorker succeeded (318ffe04-88e4-411b-ab3d-73da171512ed)
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of DiagramRequestWorker succeeded (abaaaff4-cc9c-4fc3-9f04-f6971f90d0b9)
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of DeviceFirmwareRequestWorker succeeded (280be311-f7bc-4fc1-9618-7263711ae0dd)
Jan 15 21:17:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: initial deployment complete _____________________________________________________
Jan 15 21:17:59 de.eq3.ccu.server.HMServer INFO  [Thread-2] Starting HMServer at 127.0.0.1:9292
Jan 15 21:17:59 de.eq3.ccu.server.HMServer INFO  [Thread-2] Read Configuration
Jan 15 21:18:00 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create Bidcos Dispatcher
Jan 15 21:18:00 de.eq3.ccu.server.HMServer INFO  [Thread-2] InitBidCosCache
Jan 15 21:18:02 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Thread-2] BidCosCache could not be initialized
Jan 15 21:18:02 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Thread-2] java.net.ConnectException: Connection refused (Connection refused)
Jan 15 21:18:02 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create groupDefinitionProvider
Jan 15 21:18:03 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create VirtualDeviceHolder
Jan 15 21:18:03 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create VirtualDeviceHandlerRega
Jan 15 21:18:03 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create GroupAdministrationService
Jan 15 21:18:03 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create GroupDeviceDispatcher
Jan 15 21:18:03 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create GroupDeviceHandler
Jan 15 21:18:03 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-2] @GroupDeviceHandler - initializing...
Jan 15 21:18:03 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-2] --> created groupDeviceDispatcher (GroupDeviceService to BidCoS (via Dispatcher))
Jan 15 21:18:03 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-2] --> created virtualDeviceHandler (GroupDeviceService to ReGa)
Jan 15 21:18:03 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-2] --> got groupDefinitionProvider
Jan 15 21:18:03 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create BidCosGroupMemberProvider
Jan 15 21:18:03 de.eq3.ccu.server.HMServer INFO  [Thread-2] Init groupAdministrationService
Jan 15 21:18:03 de.eq3.ccu.server.HMServer INFO  [Thread-2] Init Virtual OS Device
Jan 15 21:18:03 de.eq3.ccu.server.HMServer INFO  [Thread-2] Init ESHLight Bridge
Jan 15 21:18:04 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create RrdDatalogging
Jan 15 21:18:04 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create MeasurementService
Jan 15 21:18:04 de.eq3.ccu.server.HMServer INFO  [Thread-2] Init MeasurementService
Jan 15 21:18:05 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create HTTP Server
Jan 15 21:18:05 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create BidCos context and start handler
Jan 15 21:18:05 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create group context and start handler
Jan 15 21:18:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:18:05 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-0] (un)registerCallback on LegacyServiceHandler called from url: http://127.0.0.1:9292/bidcos
Jan 15 21:18:05 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-0] init finished
Jan 15 21:18:05 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO  [vert.x-worker-thread-4] Added InterfaceId: HmIP-RF_java
Jan 15 21:18:06 de.eq3.ccu.server.HMServer INFO  [Thread-2] Starting HMServer done
Jan 15 21:18:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:18:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:18:18 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-1] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:1999
Jan 15 21:18:18 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-1] Added InterfaceId: 1008
Jan 15 21:18:18 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO  [vert.x-worker-thread-7] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand
Jan 15 21:18:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:18:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:18:28 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-2] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:1999
Jan 15 21:18:28 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-2] init finished
Jan 15 21:18:28 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO  [vert.x-worker-thread-1] Added InterfaceId: 5816
Jan 15 21:18:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:18:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:18:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:18:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:18:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:18:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:00 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:19:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:00 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:20:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:00 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:21:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:00 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:22:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:23:00 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:23:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:23:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:23:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:23:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:23:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:23:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:23:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 21:23:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
DANKE ALEX :)
Nach oben
Benutzeravatar
deimos
Beiträge: 5410
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 962 Mal
Kontaktdaten:
Kontaktdaten von deimos

Re: Kein Funkmodul erkannt

Beitrag von deimos » 15.01.2018, 22:07

Hi,

irgendwas (ioBroker?) macht ziemlich viele Webrequest, wodurch die Logs schon teilweise rolliert wurden.
Von den vorhandenen Logs aus könnte es ein DutyCycle Problem sein, könnte aber auch was komplett anderes sein.

Kannst du daher bitte mal folgendes machen:
Verhindern, das die Webrequest gemacht werden.
Raspberry runterfahren und für eine Minute stromlos machen.
Einschalten und nach einer Minute und nach 2-3 Minuten die o.g. Befehle ausführen.

Viele Grüße
Alex
Nach oben
michi12
Beiträge: 12
Registriert: 15.01.2018, 20:40

Re: Kein Funkmodul erkannt

Beitrag von michi12 » 15.01.2018, 22:48

Ja gerne:
Ich habe in iobroker alle Module bis auf das admin-module gestoppt.

Hier der Standard-Log nach ca. 1min:

Code: Alles auswählen

sudo pivccu-attach cat /var/log/messages
Jan 15 22:42:11 homematic-ccu2 syslog.info syslogd started: BusyBox v1.20.2
Jan 15 22:42:11 homematic-ccu2 user.notice kernel: klogd started: BusyBox v1.20.2 (2018-01-05 14:41:24 CET)
Jan 15 21:42:13 homematic-ccu2 daemon.info ifplugd(eth0)[140]: ifplugd 0.28 initializing.
Jan 15 21:42:13 homematic-ccu2 daemon.info ifplugd(eth0)[140]: Using interface eth0/BA:61:C4:E2:A2:6B with driver <veth> (version: 1.0)
Jan 15 21:42:13 homematic-ccu2 daemon.info ifplugd(eth0)[140]: Using detection mode: SIOCETHTOOL
Jan 15 21:42:13 homematic-ccu2 daemon.info ifplugd(eth0)[140]: Initialization complete, link beat detected.
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: Could not open /dev/tty, cannot beep.
Jan 15 21:42:13 homematic-ccu2 daemon.info ifplugd(eth0)[140]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: sysctl: error: 'net.ipv4.tcp_timestamps' is an unknown key
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: udhcpc (v1.20.2) started
Jan 15 22:42:13 homematic-ccu2 user.debug setclock: Try to get time from fritz.box
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Sending discover...
Jan 15 22:42:13 homematic-ccu2 user.debug setclock: Mon Jan 15 22:42:13 CET 2018
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Sending select for 192.168.178.110...
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Lease of 192.168.178.110 obtained, lease time 691200
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: rm: can't remove '/var/etc/resolv.conf': No such file or directory
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: udhcpc (v1.20.2) started
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Sending discover...
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Sending select for 192.168.178.110...
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Lease of 192.168.178.110 obtained, lease time 691200
Jan 15 21:42:14 homematic-ccu2 daemon.info ifplugd(eth0)[140]: Program executed successfully.
Jan 15 21:42:18 homematic-ccu2 auth.info sshd[243]: Server listening on 0.0.0.0 port 22.
Jan 15 21:42:18 homematic-ccu2 auth.info sshd[243]: Server listening on :: port 22.
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: write_pid /var/run/cuxd.pid [255]
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: CUx-Daemon(1.12) on CCU(2.31.23) start PID:255
Jan 15 22:42:18 homematic-ccu2 user.info homematic: started cux-daemon
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:4525 update(-33s):Mon Jan 15 22:41:45 2018
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: 6 device-paramset(s) loaded ok!
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: write_proxy /var/cache/cuxd_proxy.ini (255 /usr/local/addons/cuxd/ 1.12 2.31.23 0)
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: add interface 'CUxD'
Jan 15 21:42:18 homematic-ccu2 user.info logger: Updating RF Lan Gateway Coprocessor Firmware
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: write 4 interfaces to /usr/local/etc/config/InterfacesList.xml
Jan 15 21:42:18 homematic-ccu2 user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Jan 15 21:42:18 homematic-ccu2 user.info logger: Updating RF Lan Gateway Firmware
Jan 15 21:42:18 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Jan 15 21:42:18 homematic-ccu2 user.info logger: Updating Wired Lan Gateway Firmware
Jan 15 21:42:18 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
Jan 15 22:42:22 homematic-ccu2 user.info kernel: [   35.489621] eq3loop: created slave ttyS0
Jan 15 22:42:22 homematic-ccu2 user.info kernel: [   35.490318] eq3loop: created slave mmd_bidcos
Jan 15 22:43:06 homematic-ccu2 user.err rfd: Init failed. Parameter 'AccessFile' not set in bidcos configuration file.
Jan 15 22:43:06 homematic-ccu2 user.err rfd: No BidCoS-Interface available
Und hier nach 2-3min:

Code: Alles auswählen

sudo pivccu-attach cat /var/log/messages
Jan 15 22:42:11 homematic-ccu2 syslog.info syslogd started: BusyBox v1.20.2
Jan 15 22:42:11 homematic-ccu2 user.notice kernel: klogd started: BusyBox v1.20.2 (2018-01-05 14:41:24 CET)
Jan 15 21:42:13 homematic-ccu2 daemon.info ifplugd(eth0)[140]: ifplugd 0.28 initializing.
Jan 15 21:42:13 homematic-ccu2 daemon.info ifplugd(eth0)[140]: Using interface eth0/BA:61:C4:E2:A2:6B with driver <veth> (version: 1.0)
Jan 15 21:42:13 homematic-ccu2 daemon.info ifplugd(eth0)[140]: Using detection mode: SIOCETHTOOL
Jan 15 21:42:13 homematic-ccu2 daemon.info ifplugd(eth0)[140]: Initialization complete, link beat detected.
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: Could not open /dev/tty, cannot beep.
Jan 15 21:42:13 homematic-ccu2 daemon.info ifplugd(eth0)[140]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: sysctl: error: 'net.ipv4.tcp_timestamps' is an unknown key
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: udhcpc (v1.20.2) started
Jan 15 22:42:13 homematic-ccu2 user.debug setclock: Try to get time from fritz.box
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Sending discover...
Jan 15 22:42:13 homematic-ccu2 user.debug setclock: Mon Jan 15 22:42:13 CET 2018
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Sending select for 192.168.178.110...
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Lease of 192.168.178.110 obtained, lease time 691200
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: rm: can't remove '/var/etc/resolv.conf': No such file or directory
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: udhcpc (v1.20.2) started
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Sending discover...
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Sending select for 192.168.178.110...
Jan 15 21:42:13 homematic-ccu2 daemon.warn ifplugd(eth0)[140]: client: Lease of 192.168.178.110 obtained, lease time 691200
Jan 15 21:42:14 homematic-ccu2 daemon.info ifplugd(eth0)[140]: Program executed successfully.
Jan 15 21:42:18 homematic-ccu2 auth.info sshd[243]: Server listening on 0.0.0.0 port 22.
Jan 15 21:42:18 homematic-ccu2 auth.info sshd[243]: Server listening on :: port 22.
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: write_pid /var/run/cuxd.pid [255]
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: CUx-Daemon(1.12) on CCU(2.31.23) start PID:255
Jan 15 22:42:18 homematic-ccu2 user.info homematic: started cux-daemon
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:4525 update(-33s):Mon Jan 15 22:41:45 2018
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: 6 device-paramset(s) loaded ok!
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: write_proxy /var/cache/cuxd_proxy.ini (255 /usr/local/addons/cuxd/ 1.12 2.31.23 0)
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: add interface 'CUxD'
Jan 15 21:42:18 homematic-ccu2 user.info logger: Updating RF Lan Gateway Coprocessor Firmware
Jan 15 22:42:18 homematic-ccu2 daemon.info cuxd[255]: write 4 interfaces to /usr/local/etc/config/InterfacesList.xml
Jan 15 21:42:18 homematic-ccu2 user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Jan 15 21:42:18 homematic-ccu2 user.info logger: Updating RF Lan Gateway Firmware
Jan 15 21:42:18 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Jan 15 21:42:18 homematic-ccu2 user.info logger: Updating Wired Lan Gateway Firmware
Jan 15 21:42:18 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
Jan 15 22:42:22 homematic-ccu2 user.info kernel: [   35.489621] eq3loop: created slave ttyS0
Jan 15 22:42:22 homematic-ccu2 user.info kernel: [   35.490318] eq3loop: created slave mmd_bidcos
Jan 15 22:43:06 homematic-ccu2 user.err rfd: Init failed. Parameter 'AccessFile' not set in bidcos configuration file.
Jan 15 22:43:06 homematic-ccu2 user.err rfd: No BidCoS-Interface available
Jan 15 22:43:29 homematic-ccu2 daemon.warn cuxd[255]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Jan 15 22:43:32 homematic-ccu2 daemon.warn cuxd[255]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","CONTROL_MODE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","FAULT_REPORTING"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","1007"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","BATTERY_STATE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [iseXmlRpc.cpp:1204]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=BidCos-RF [iseRTHss.cpp:163]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","VALVE_STATE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","BOOST_STATE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","ACTUAL_TEMPERATURE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","SET_TEMPERATURE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","PARTY_TEMPERATURE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","PARTY_START_TIME"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","PARTY_START_DAY"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"MEQ0640322:1","MOTION"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","PARTY_START_MONTH"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"MEQ0640322:1","BRIGHTNESS"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","PARTY_START_YEAR"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","PARTY_STOP_TIME"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","PARTY_STOP_DAY"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0755669:1","STATE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","PARTY_STOP_MONTH"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0413517:4","PARTY_STOP_YEAR"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:1","STATE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:1","INHIBIT"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:2","ENERGY_COUNTER"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:2","POWER"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:2","CURRENT"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:2","VOLTAGE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:2","FREQUENCY"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =setValue Params = {"NEQ0413517:4","AUTO_MODE",false} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1502]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = NEQ0413517:4 [iseDOMdpHSS.cpp:77]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:4","DECISION_VALUE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"LEQ1344308:1","STATE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:5","DECISION_VALUE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =setValue Params = {"NEQ0180311:1","STATE",false} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1502]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = NEQ0180311:1 [iseDOMdpHSS.cpp:77]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:6","DECISION_VALUE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0755668:1","STATE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0755668:1","ERROR"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =setValue Params = {"LEQ1344308:1","STATE",false} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1502]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = LEQ1344308:1 [iseDOMdpHSS.cpp:77]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0755668:1","LOWBAT"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"LEQ1344308:2","ENERGY_COUNTER"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"LEQ1345236:2","ENERGY_COUNTER"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"LEQ1345236:3","DECISION_VALUE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:3","DECISION_VALUE"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"NEQ0154595:2","BOOT"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"LEQ1344308:2","BOOT"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =getValue Params = {"LEQ1345236:2","BOOT"} result= nil [iseXmlRpc.cpp:2599]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jan 15 22:43:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jan 15 22:43:53 homematic-ccu2 user.debug setclock: Try to get time from fritz.box
Jan 15 22:43:53 homematic-ccu2 user.debug setclock: Mon Jan 15 22:43:53 CET 2018
Jan 15 22:43:56 homematic-ccu2 daemon.info cuxd[255]: INIT 'xmlrpc_bin://127.0.0.1:1999' '1015'
Jan 15 22:43:57 homematic-ccu2 daemon.info cuxd[255]: setup CUX9001001:1 read(NEQ0755668:1) => BidCos-RF.NEQ0755668:1 (SHUTTER_CONTACT) DP(|STATE|ERROR|LOWBAT|INSTALL_TEST|)
Jan 15 22:43:57 homematic-ccu2 daemon.info cuxd[255]: setup CUX9002001:1 read(MEQ1601511:1) => BidCos-RF.MEQ1601511:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Jan 15 22:43:57 homematic-ccu2 daemon.err cuxd[255]: sendbinrpc(127.0.0.1:2001) - write() Connection refused
und hier noch der hm-server nach 2-3 min:

Code: Alles auswählen

sudo pivccu-attach cat /var/log/hmserver.log
Jan 15 22:43:11 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] @GenericFactory
Jan 15 22:43:11 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] creating instance of HMServerConfiguration with no-arg constructor
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [HMIPTRXWriterWorker] (1) *worker
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [KeyServerWorker] (1) *worker
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [KryoPersistenceWorker] (1) *worker
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [TransactionSubsystemHandler] (1) *worker
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [FirmwareLoaderFileSystem] (1) *worker
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerPersistentDataLoader] (1)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerAdapterInitialization] (1)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [BackendCommandHandler] (1)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceInclusionAcceptHandler] (1)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [IncomingHMIPFrameHandler] (1)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceBackgroundUpdateSubsystem] (1)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceInclusionDefaultConfigurationChanger] (1)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [CyclicSmokeDetectorAwakening] (1)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerFirmwareUpdateInitialization] (1)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyNotificationHandler] (1) *worker
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyAPIWorker] (1) *worker
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyBackendNotificationHandler] (3) *worker
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyBlindLevelCorrectionHandler] (1) *worker
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyInitializion] (1)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: deploying 19 classes to Vert.x
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: 19 VertxDeployers initialized
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of CyclicSmokeDetectorAwakening succeeded (c174c683-1d2b-4166-9443-b1ee39ae7d30)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of HMIPTRXWriterWorker succeeded (42001d3c-9b5f-4098-a3a6-cbeebc55154c)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of DeviceInclusionDefaultConfigurationChanger succeeded (83c67332-f399-4984-b117-f447f83ea5e3)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of TransactionSubsystemHandler succeeded (fa676279-a60e-493c-8579-e4a26a04c437)
Jan 15 22:43:18 de.eq3.cbcs.server.core.vertx.KeyServerWorker ERROR [vert.x-worker-thread-2] Missing key server configuration parameter (Network.Key) for  mode: KEYSERVER_LOCAL
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of LegacyBlindLevelCorrectionHandler succeeded (2a804e72-a12b-405a-a4ab-8f755ff138fa)
Jan 15 22:43:18 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of KeyServerWorker succeeded (e12ae49f-d407-47fa-b2db-6eb2dc8f7caf)
Jan 15 22:43:19 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of DeviceBackgroundUpdateSubsystem succeeded (790bd8ec-d378-41e7-8b9d-d80af897309e)
Jan 15 22:43:19 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of KryoPersistenceWorker succeeded (4cb54d74-f320-44a8-b3fa-ab99ddbfd5c1)
Jan 15 22:43:20 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of LocalServerPersistentDataLoader succeeded (5673cf7c-de2f-4ece-9050-2b1a5ddeccc1)
Jan 15 22:43:21 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of IncomingHMIPFrameHandler succeeded (b8a48c53-fbd0-4fb8-b958-a19c56bc6d46)
Jan 15 22:43:21 de.eq3.cbcs.server.core.otau.util.FirmwareLoaderFileSystem INFO  [vert.x-worker-thread-1] SYSTEM: Firmware update directory is set to /etc/config/firmware
Jan 15 22:43:21 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of FirmwareLoaderFileSystem succeeded (1e71c704-2ab3-4bcd-92cc-fda507f11969)
Jan 15 22:43:21 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of DeviceInclusionAcceptHandler succeeded (9966effe-1dcb-4e5e-8606-beaf359f9730)
Jan 15 22:43:21 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of LegacyNotificationHandler succeeded (26e7aa05-f6dc-48b0-ab49-d0db14c864af)
Jan 15 22:43:21 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of BackendCommandHandler succeeded (983c9f29-58f2-4118-8210-f99cf8845d66)
Jan 15 22:43:21 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of LegacyBackendNotificationHandler succeeded (a3a0dd7e-a2db-4d3e-9c65-a38b468eaf00)
Jan 15 22:43:21 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of LegacyAPIWorker succeeded (045fb94b-f762-45b8-a4c7-145c67faf7c2)
Jan 15 22:43:21 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of LocalServerAdapterInitialization succeeded (d890b2b4-399c-4898-be0f-b58d2c585f55)
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter state 1: HMIP_TRX_App
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter application is already running
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] No NWK, try to set address ...
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Try to set radio address 12379740...
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Set max send attempts for 3014F711A061A7D3C9962941 to 3
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Try to get application version...
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Application version 2.8.5
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Bootloader version 1.0.3
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] hmos version 1.20.2
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] MCU type: Si1002_8051
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Duty Cycle: 0.0
Jan 15 22:43:21 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] set DutyCycle limit to ffffffc8
Jan 15 22:43:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Set Duty Cycle Limit
Jan 15 22:43:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Current Security Counter: 32933632
Jan 15 22:43:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter has no linkpartner
Jan 15 22:43:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Adapter with Access Point id 3014F711A061A7D3C9962941 initialized
Jan 15 22:43:22 de.eq3.cbcs.server.local.base.internal.LocalServerAdapterInitialization INFO  [Thread-6] HMIPTRXInitialResponseListener said that Adapter was initialized
Jan 15 22:43:23 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of LegacyInitializion succeeded (6c9bc735-f170-47f2-b965-bc253ccd08ed)
Jan 15 22:43:23 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of LocalServerFirmwareUpdateInitialization succeeded (8ed26334-8ede-4a92-81b3-a4b096ed3096)
Jan 15 22:43:23 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-3] SYSTEM: Checking all devices on all accesspoints for updates
Jan 15 22:43:23 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-3] SYSTEM: There are 0 APs queued with updatable devices
Jan 15 22:43:23 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: initial deployment complete _____________________________________________________
Jan 15 22:43:26 de.eq3.ccu.server.HMServer INFO  [Thread-2] Default MaxEventLoopExecuteTime: 2000000000
Jan 15 22:43:26 de.eq3.ccu.server.HMServer INFO  [Thread-2] Default BlockedThreadCheckInterval: 1000
Jan 15 22:43:26 de.eq3.ccu.server.HMServer INFO  [Thread-2] Default MaxWorkerExecuteTime: 60000000000
Jan 15 22:43:26 de.eq3.ccu.server.HMServer INFO  [Thread-2] Default EventLoopPoolSize: 8
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [BackendWorker] (1) *worker
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [GroupRequestWorker] (1) *worker
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [DiagramRequestWorker] (1) *worker
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [StorageRequestWorker] (1) *worker
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [DeviceFirmwareRequestWorker] (1) *worker
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [EnergyPriceRequestWorker] (1) *worker
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: added for deployment [CouplingRequestWorker] (1) *worker
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: deploying 7 classes to Vert.x
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: 7 VertxDeployers initialized
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of BackendWorker succeeded (63c4d3fe-2d99-4919-8e5f-549af7fdd435)
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of EnergyPriceRequestWorker succeeded (71f3fbea-de37-484c-98da-62144fac6d33)
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of CouplingRequestWorker succeeded (0d1b5480-cc82-4538-ab6c-74b6746c8f1c)
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of StorageRequestWorker succeeded (39221683-50b8-447e-9d28-6cd2f8fc72ff)
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of DiagramRequestWorker succeeded (4859ab8f-30e2-4106-88ae-7a2f7f6e85ce)
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of GroupRequestWorker succeeded (8364fb38-75c4-4884-8cbd-37acdcf6470d)
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of DeviceFirmwareRequestWorker succeeded (05bdb7e7-018c-4102-ad6a-bc0cd780a0ce)
Jan 15 22:43:26 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-2] SYSTEM: initial deployment complete _____________________________________________________
Jan 15 22:43:26 de.eq3.ccu.server.HMServer INFO  [Thread-2] Starting HMServer at 127.0.0.1:9292
Jan 15 22:43:26 de.eq3.ccu.server.HMServer INFO  [Thread-2] Read Configuration
Jan 15 22:43:27 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create Bidcos Dispatcher
Jan 15 22:43:27 de.eq3.ccu.server.HMServer INFO  [Thread-2] InitBidCosCache
Jan 15 22:43:29 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Thread-2] BidCosCache could not be initialized
Jan 15 22:43:29 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Thread-2] java.net.ConnectException: Connection refused (Connection refused)
Jan 15 22:43:29 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create groupDefinitionProvider
Jan 15 22:43:30 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create VirtualDeviceHolder
Jan 15 22:43:30 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create VirtualDeviceHandlerRega
Jan 15 22:43:30 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create GroupAdministrationService
Jan 15 22:43:30 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create GroupDeviceDispatcher
Jan 15 22:43:30 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create GroupDeviceHandler
Jan 15 22:43:30 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-2] @GroupDeviceHandler - initializing...
Jan 15 22:43:30 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-2] --> created groupDeviceDispatcher (GroupDeviceService to BidCoS (via Dispatcher))
Jan 15 22:43:30 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-2] --> created virtualDeviceHandler (GroupDeviceService to ReGa)
Jan 15 22:43:30 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-2] --> got groupDefinitionProvider
Jan 15 22:43:30 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create BidCosGroupMemberProvider
Jan 15 22:43:30 de.eq3.ccu.server.HMServer INFO  [Thread-2] Init groupAdministrationService
Jan 15 22:43:30 de.eq3.ccu.server.HMServer INFO  [Thread-2] Init Virtual OS Device
Jan 15 22:43:30 de.eq3.ccu.server.HMServer INFO  [Thread-2] Init ESHLight Bridge
Jan 15 22:43:32 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create RrdDatalogging
Jan 15 22:43:32 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create MeasurementService
Jan 15 22:43:32 de.eq3.ccu.server.HMServer INFO  [Thread-2] Init MeasurementService
Jan 15 22:43:32 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create HTTP Server
Jan 15 22:43:32 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create BidCos context and start handler
Jan 15 22:43:32 de.eq3.ccu.server.HMServer INFO  [Thread-2] Create group context and start handler
Jan 15 22:43:32 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:43:32 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-1] (un)registerCallback on LegacyServiceHandler called from url: http://127.0.0.1:9292/bidcos
Jan 15 22:43:32 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-1] init finished
Jan 15 22:43:32 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO  [vert.x-worker-thread-4] Added InterfaceId: HmIP-RF_java
Jan 15 22:43:33 de.eq3.ccu.server.HMServer INFO  [Thread-2] Starting HMServer done
Jan 15 22:43:37 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:43:42 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:43:46 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-1] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:1999
Jan 15 22:43:46 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-1] Added InterfaceId: 1008
Jan 15 22:43:46 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO  [vert.x-worker-thread-7] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand
Jan 15 22:43:47 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:43:52 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:43:56 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-0] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:1999
Jan 15 22:43:56 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-0] init finished
Jan 15 22:43:56 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO  [vert.x-worker-thread-3] Added InterfaceId: 5816
Jan 15 22:43:57 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:02 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:07 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:12 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:17 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:22 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:27 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:32 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:37 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:42 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:47 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:52 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:44:57 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:02 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:07 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:12 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:17 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:22 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:27 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:32 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:37 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:42 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:47 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:52 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:45:57 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:02 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:07 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:12 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:17 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:22 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:27 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:32 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:37 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:42 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:47 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:52 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:46:57 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:47:02 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:47:07 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:47:12 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:47:17 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:47:22 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:47:27 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:47:32 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:47:37 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:47:42 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Jan 15 22:47:47 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-3] Could not register BidCos-RF_java
Nach oben
Benutzeravatar
deimos
Beiträge: 5410
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 962 Mal
Kontaktdaten:
Kontaktdaten von deimos

Re: Kein Funkmodul erkannt

Beitrag von deimos » 15.01.2018, 23:02

Hi,

damit kommen wir der Sache näher.

Kann es sein, dass du mit der Config mal einen Ausflug über YAHM gemacht hattest? Dann bitte die Schritte für die YAHM Migration durcharbeiten (Siehe Readme bei mir im Github)

Ansonsten, kannst du bitte mal die Datei /var/lib/piVCCU/userfs/etc/config/r
d.conf hier posten?

Viele Grüße
Alex
Nach oben
michi12
Beiträge: 12
Registriert: 15.01.2018, 20:40

Re: Kein Funkmodul erkannt

Beitrag von michi12 » 15.01.2018, 23:09

Den Ausflug nach YAHM habe ich tatsächlich mal unternommen aber dabei Probleme gehabt und bin dann auf raspimatic.

Ich wollte aber schon lange iobroker parallel installiert haben und da bin ich auf deine tolle piVCCU gestoßen:)
Sie gefällt mir sehr, da das Update auf eine neue Version kinderleicht ist und sehr nah am Original ist.

Werde morgen die Migrationshinweise durchführen und mich wieder melden.
Vielleicht kannst du in deiner Anleitung noch dazu schreiben, dass sobald man einmal zwischendurch auf YAHM war diese Migration durchführen muss auch wenn man beispielsweise vorher raspimatic verwendet hat.
Danke bis dahin und gute Nacht:)
Nach oben
Antworten

Zurück zu „piVCCU“